Threat Intelligence

On versions 15.1.0-15.1.0.1, 15.0.0-15.0.1.2, and 14.1.0-14.1.2.3, in BIG-IP APM portal access, a specially crafted HTTP request can lead to reflected XSS after the BIG-IP APM system rewrites the HTTP response from the untrusted backend server and sends it to the client.

In BIG-IP APM portal access on versions 15.0.0-15.1.0, 14.0.0-14.1.2.3, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, when backend servers serve HTTP pages with special JavaScript code, this can lead to internal portal access name conflict.

On BIG-IP 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, a reflected cross-site scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Traffic Management User Interface (TMUI), also known as the BIG-IP Configuration utility.

There is a Stored Cross Site Scripting vulnerability in the undisclosed page of a BIG-IQ 6.0.0-6.1.0 or 5.2.0-5.4.0 system. The attack can be stored by users granted the Device Manager and Administrator roles.

On BIG-IP (AFM, ASM) 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, and 11.5.1-11.6.4, a stored cross-site scripting vulnerability in AFM feed list. In the worst case, an attacker can store a CSRF which results in code execution as the admin user. The level of user role which can perform this attack are resource administrator and administrator.

On BIG-IP (AFM, PEM) 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.1-11.5.8, an undisclosed TMUI pages for AFM and PEM Subscriber management are vulnerable to a stored cross-site scripting (XSS) issue. This is a control plane issue only and is not accessible from the data plane. The attack requires a malicious resource administrator to store the XSS.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, and 11.5.1-11.6.4, a reflected cross-site scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Traffic Management User Interface (TMUI) also known as the BIG-IP Configuration utility.

On BIG-IP (AFM, Analytics, ASM) 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, and 11.5.1-11.6.3.4, A reflected cross-site scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Traffic Management User Interface (TMUI), also known as the Configuration utility.

A Cross Site Scripting (XSS) vulnerability in versions of F5 WebSafe Dashboard 3.9.x and earlier, aka F5 WebSafe Alert Server, allows an unauthenticated user to inject HTML via a crafted alert.

Cross-Site-Scripting (XSS) vulnerabilities in F5 WebSafe Dashboard 3.9.5 and earlier, aka F5 WebSafe Alert Server, allow privileged authenticated users to inject arbitrary web script or HTML when creating a new user, account or signature.

In BIG-IP 11.6.1-11.6.3.2 or 11.5.1-11.5.8, or Enterprise Manager 3.1.1, improper escaping of values in an undisclosed page of the configuration utility may result with an improper handling on the JSON response when it is injected by a malicious script via a remote cross-site scripting (XSS) attack.

In BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.3, 12.1.0-12.1.3.7, 11.6.1-11.6.3.2, or 11.5.1-11.5.8, when remote authentication is enabled for administrative users and all external users are granted the "guest" role, unsanitized values can be reflected to the client via the login page. This can lead to a cross-site scripting attack against unauthenticated clients.

Cross-site scripting (XSS) vulnerability in F5 BIG-IP Access Policy Manager (APM) 11.5.x and 11.6.x Admin Web UI.

On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.3, 12.1.0-12.1.3.7, and 11.6.0-11.6.3.2, a reflected Cross Site Scripting (XSS) vulnerability is present in an undisclosed page of the BIG-IP TMUI (Traffic Management User Interface) also known as the BIG-IP configuration utility.

On BIG-IP APM 14.0.0 to 14.0.0.4, 13.0.0 to 13.1.1.3 and 12.1.0 to 12.1.3.7, a reflected cross-site scripting (XSS) vulnerability exists in the resource information page for authenticated users when a full webtop is configured on the BIG-IP APM system.

On F5 BIG-IP 13.0.0-13.1.1.1 and 12.1.0-12.1.3.6, a reflected Cross-Site Scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Configuration utility that allows an authenticated user to execute JavaScript for the currently logged-in user.

On F5 BIG-IP AFM 13.0.0-13.1.1.1 and 12.1.0-12.1.3.6, there is a Reflected Cross Site Scripting vulnerability in undisclosed TMUI page.

On F5 BIG-IP AFM 13.0.0-13.1.1.1 and 12.1.0-12.1.3.6, there is a Reflected Cross Site Scripting vulnerability in undisclosed TMUI page.

On F5 BIG-IP 13.0.0-13.1.1.1 and 12.1.0-12.1.3.6, there is a reflected Cross Site Scripting (XSS) vulnerability in an undisclosed Configuration Utility page.

On F5 BIG-IP 12.1.0-12.1.3.1, 11.6.1-11.6.3.1, 11.5.1-11.5.5, or 11.2.1, carefully crafted URLs can be used to reflect arbitrary content into GeoIP lookup responses, potentially exposing clients to XSS.

IBM WebSphere Portal 8.5 and 9.0 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 140918.

A stored cross-site scripting (XSS) vulnerability in the Configuration utility device name change page in BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, PSM, WebAccelerator, WOM and WebSafe version 12.0.0 - 12.1.2, 11.4.0 - 11.6.1, and 11.2.1 allows an authenticated user to inject arbitrary web script or HTML. Exploitation requires Resource Administrator or Administrator privileges, and it could cause the Configuration utility client to become unstable.

In F5 BIG-IP APM 12.0.0 through 12.1.2, non-authenticated users may be able to inject JavaScript into a request that will then be rendered and executed in the context of the Administrative user when the Administrative user is viewing the Access System Logs, allowing the non-authenticated user to carry out a Cross Site Scripting (XSS) attack against the Administrative user.

Cross-site scripting (XSS) vulnerability in F5 BIG-IP Application Security Manager (ASM) before 11.6 allows remote attackers to inject arbitrary web script or HTML via the Response Body field when creating a new user account.

Cross-site scripting (XSS) vulnerability in the tree view (pl_tree.php) feature in Application Security Manager (ASM) in F5 BIG-IP 11.3.0 allows remote attackers to inject arbitrary web script or HTML by accessing a crafted URL during automatic policy generation.

Cross-site scripting (XSS) vulnerability in tmui/dashboard/echo.jsp in the Configuration utility in F5 BIG-IP LTM, APM, ASM, GTM, and Link Controller 11.0.0 before 11.6.0 and 10.1.0 through 10.2.4, AAM 11.4.0 before 11.6.0, AFM and PEM 11.3.0 before 11.6.0, Analytics 11.0.0 through 11.5.1, Edge Gateway, WebAccelerator, and WOM 11.0.0 through 11.3.0 and 10.1.0 through 10.2.4, and PSM 11.0.0 through 11.4.1 and 10.1.0 through 10.2.4 and Enterprise Manager 3.0.0 through 3.1.1 and 2.1.0 through 2.3.0 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors.

Cross-site scripting (XSS) vulnerability in list.jsp in the Configuration utility in F5 BIG-IP LTM, AFM, Analytics, APM, ASM, GTM, and Link Controller 11.2.1 through 11.5.1, AAM 11.4.0 through 11.5.1 PEM 11.3.0 through 11.5.1, PSM 11.2.1 through 11.4.1, WebAccelerator and WOM 11.2.1 through 11.3.0, and Enterprise Manager 3.0.0 through 3.1.1 allows remote attackers to inject arbitrary web script or HTML via unspecified parameters.

Multiple cross-site scripting (XSS) vulnerabilities in Belkin Model F5D8236-4 v2 router allow remote attackers to inject arbitrary web script or HTML via unspecified vectors.

Cross-site scripting (XSS) vulnerability in the access policy logout page (logout.inc) in F5 BIG-IP APM 10.1.0 through 10.2.4 and 11.1.0 through 11.3.0 allows remote attackers to inject arbitrary web script or HTML via the LastMRH_Session cookie.

Cross-site scripting (XSS) vulnerability in the traffic overview page on the F5 ASM appliance 10.0.0 through 11.2.0 HF2 allows remote attackers to inject arbitrary web script or HTML via crafted requests that are later listed on a summary page.

In versions 7.1.5-7.1.8, the BIG-IP Edge Client components in BIG-IP APM, Edge Gateway, and FirePass legacy allow attackers to obtain the full session ID from process memory.

On BIG-IP 12.1.0-12.1.5, the TMM process may produce a core file in some cases when Ram Cache incorrectly optimizes stored data resulting in memory errors.

A buffer overflow in H5O__layout_encode in H5Olayout.c in the HDF HDF5 through 1.10.4 library allows attackers to cause a denial of service via a crafted HDF5 file. This issue was triggered while repacking an HDF5 file, aka "Invalid write of size 2."

IBM Domino 9.0 and 9.0.1 could allow an attacker to execute commands on the system by triggering a buffer overflow in the parsing of command line arguments passed to nsd.exe. IBM X-force ID: 148687.

A heap-based buffer overflow in ReadGifImageDesc() in gifread.c in the HDF HDF5 through 1.10.3 library allows attackers to cause a denial of service via a crafted HDF5 file. This issue was triggered while converting a GIF file to an HDF file.

An issue was discovered in the HDF HDF5 1.10.3 library. There is a stack-based buffer overflow in the function H5S_extent_get_dims() in H5S.c. Specifically, this issue occurs while converting an HDF5 file to a GIF file.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a memcpy parameter overlap in the function H5O_link_decode in H5Olink.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a heap-based buffer overflow in the function H5FL_blk_malloc in H5FL.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a heap-based buffer overflow in the function H5G_ent_decode in H5Gent.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a stack-based buffer overflow in the function H5FD_sec2_read in H5FDsec2.c, related to HDmemset.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a stack-based buffer overflow in the function H5FD_sec2_read in H5FDsec2.c, related to HDread.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, Websafe software version 12.0.0 to 12.1.2, 11.6.0 to 11.6.1, 11.4.0 to 11.5.4, 11.2.1, in some cases TMM may crash when processing TCP traffic. This vulnerability affects TMM via a virtual server configured with TCP profile. Traffic processing is disrupted while Traffic Management Microkernel (TMM) restarts. If the affected BIG-IP system is configured to be part of a device group, it will trigger a failover to the peer device.

In F5 BIG-IP LTM, AAM, AFM, APM, ASM, Link Controller, PEM, PSM software version 12.0.0 to 12.1.2, 11.6.0 to 11.6.1, 11.4.0 to 11.5.4, when a virtual server uses the standard configuration of HTTP/2 or SPDY profile with Client SSL profile, and the client initiates a number of concurrent streams beyond the advertised limit can cause a disruption of service. Remote client initiating stream beyond the advertised limit can cause a disruption of service. The Traffic Management Microkernel (TMM) data plane is exposed to this issue; the control plane is not exposed.

The DHCP relay subsystem of Cisco IOS 12.2 through 15.6 and Cisco IOS XE Software contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the DHCP relay subsystem of the affected software. An attacker could exploit this vulnerability by sending a crafted DHCP Version 4 (DHCPv4) packet to an affected system. A successful exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. Cisco Bug IDs: CSCsm45390, CSCuw77959.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve57697.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve66601.

Buffer overflow in the mcpq daemon in F5 BIG-IP systems 10.x before 10.2.4 HF12, 11.x before 11.2.1 HF15, 11.3.x, 11.4.x before 11.4.1 HF9, 11.5.x before 11.5.2 HF1, and 11.6.0 before HF4, and Enterprise Manager 2.1.0 through 2.3.0 and 3.x before 3.1.1 HF5 allows remote authenticated administrators to cause a denial of service via unspecified vectors.

In the HDF5 1.8.16 library's failure to check if the number of dimensions for an array read from the file is within the bounds of the space allocated for it, a heap-based buffer overflow will occur, potentially leading to arbitrary code execution.

The HDF5 1.8.16 library allocating space for the array using a value from the file has an impact within the loop for initializing said array allowing a value within the file to modify the loop's terminator. Due to this, an aggressor can cause the loop's index to point outside the bounds of the array when initializing it.

F5 BIG-IP APM 11.4.1 before 11.4.1 HF9, 11.5.x before 11.5.3, and 11.6.0 before 11.6.0 HF4 allow remote attackers to cause a denial of service or execute arbitrary code via unspecified vectors related to processing a Citrix Remote Desktop connection through a virtual server configured with a remote desktop profile, aka an "Out-of-bounds memory vulnerability."

An Improper Validation of Syntactic Correctness of Input vulnerability in the Juniper DHCP daemon (jdhcpd) of Juniper Networks Junos OS allows an adjacent unauthenticated attacker sending a malformed DHCP packet to cause a crash of jdhcpd and thereby a Denial of Service (DoS). If option-82 is configured in a DHCP snooping / -security scenario, jdhcpd crashes if a specific malformed DHCP request packet is received. The DHCP functionality is impacted while jdhcpd restarts, and continued exploitation of the vulnerability will lead to the unavailability of the DHCP service and thereby a sustained DoS. This issue affects Juniper Networks Junos OS 13.2 version 13.2R1 and later versions prior to 15.1R7-S11; 18.3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S10; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. This issue does not affect Juniper Networks Junos OS version 12.3R12 and prior versions.

On BIG-IP 15.0.0-15.1.0.1, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.1, malformed input to the DATAGRAM::tcp iRules command within a FLOW_INIT event may lead to a denial of service.

On BIG-IP 15.1.0-15.1.0.1, 15.0.0-15.0.1.2, and 14.1.0-14.1.2.3, undisclosed HTTP/2 requests can lead to a denial of service when sent to a virtual server configured with the Fallback Host setting and a server-side HTTP/2 profile.

In versions prior to 3.3.0, the NGINX Controller Agent installer script 'install.sh' uses HTTP instead of HTTPS to check and install packages

A vulnerability in the BGP FlowSpec implementation may cause a Juniper Networks Junos OS device to terminate an established BGP session upon receiving a specific BGP FlowSpec advertisement. The BGP NOTIFICATION message that terminates an established BGP session is sent toward the peer device that originally sent the specific BGP FlowSpec advertisement. This specific BGP FlowSpec advertisement received from a BGP peer might get propagated from a Junos OS device running the fixed release to another device that is vulnerable causing BGP session termination downstream. This issue affects IPv4 and IPv6 BGP FlowSpec deployment. This issue affects Juniper Networks Junos OS: 12.3; 12.3X48 on SRX Series; 14.1X53 on EX and QFX Series; 15.1 versions prior to 15.1R7-S5; 15.1F versions prior to 15.1F6-S13; 15.1X49 versions prior to 15.1X49-D180 on SRX Series; 15.1X53 versions prior to 15.1X53-D238 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D497 on NFX Series; 15.1X53 versions prior to 15.1X53-D592 on EX2300/EX3400; 16.1 versions prior to 16.1R7-S7; 17.1 versions prior to 17.1R2-S12, 17.1R3; 17.2 versions prior to 17.2R2-S7, 17.2R3; 17.2X75 versions prior to 17.2X75-D102, 17.2X75-D110, 17.2X75-D44; 17.3 versions prior to 17.3R2-S5, 17.3R3-S5; 17.4 versions prior to 17.4R1-S8, 17.4R2; 18.1 versions prior to 18.1R2-S4, 18.1R3; 18.2X75 versions prior to 18.2X75-D20.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, undisclosed HTTP behavior may lead to a denial of service.

On BIG-IP 15.1.0.1, specially formatted HTTP/3 messages may cause TMM to produce a core file.

On BIG-IP 15.1.0-15.1.0.1, 15.0.0-15.0.1.1, and 14.1.0-14.1.2.2, under certain conditions, TMM may crash or stop processing new traffic with the DPDK/ENA driver on AWS systems while sending traffic. This issue does not affect any other platforms, hardware or virtual, or any other cloud provider since the affected driver is specific to AWS.

On BIG-IP 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.6.0-11.6.5.1, the tmm crashes under certain circumstances when using the connector profile if a specific sequence of connections are made.

On BIG-IP 15.0.0-15.0.1.1 and 14.1.0-14.1.2.2, while processing specifically crafted traffic using the default 'xnet' driver, Virtual Edition instances hosted in Amazon Web Services (AWS) may experience a TMM restart.

On BIG-IP versions 15.0.0-15.0.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5, while processing traffic through a standard virtual server that targets a FastL4 virtual server (VIP on VIP), hardware appliances may stop responding.

On versions 15.0.0-15.0.1.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, under certain conditions, a multi-bladed BIG-IP Virtual Clustered Multiprocessing (vCMP) may drop broadcast packets when they are rebroadcast to the vCMP guest secondary blades. An attacker can leverage the fragmented broadcast IP packets to perform any type of fragmentation-based attack.

On BIG-IP versions 15.0.0-15.0.1.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, the Traffic Management Microkernel (TMM) might stop responding after the total number of diameter connections and pending messages on a single virtual server has reached 32K.

On versions 15.0.0-15.0.1, 14.0.0-14.1.2.2, and 13.1.0-13.1.3.1, TMM may restart on BIG-IP Virtual Edition (VE) when using virtio direct descriptors and packets 2 KB or larger.

On BIG-IP versions 15.0.0-15.0.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, and 12.1.0-12.1.5, under certain conditions when using custom TCP congestion control settings in a TCP profile, TMM stops processing traffic when processed by an iRule.

On BIG-IP versions 15.0.0-15.0.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, and 13.1.0-13.1.3.1, the TMM process may restart when the packet filter feature is enabled.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, and 13.1.0-13.1.1.4, the TMM process may produce a core file when an upstream server or cache sends the BIG-IP an invalid age header value.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5.1, undisclosed traffic flow may cause TMM to restart under some circumstances.

On BIG-IP AFM 15.0.0-15.0.1, 14.0.0-14.1.2, and 13.1.0-13.1.3.1, when bad-actor detection is configured on a wildcard virtual server on platforms with hardware-based sPVA, the performance of the BIG-IP AFM system is degraded.

On versions 15.0.0-15.0.1 and 14.0.0-14.1.2, when the BIG-IP is configured in HTTP/2 Full Proxy mode, specifically crafted requests may cause a disruption of service provided by the Traffic Management Microkernel (TMM).

On F5 SSL Orchestrator 15.0.0-15.0.1 and 14.0.0-14.1.2, TMM may crash when processing SSLO data in a service-chaining configuration.

On version 14.0.0-14.1.0.1, BIG-IP virtual servers with TLSv1.3 enabled may experience a denial of service due to undisclosed incoming messages.

The BIG-IP 15.0.0-15.0.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5.1, BIG-IQ 7.0.0, 6.0.0-6.1.0, and 5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1 configuration utility is vulnerable to Anti DNS Pinning (DNS Rebinding) attack.

On BIG-IP 15.0.0 and 14.1.0-14.1.0.6, under certain conditions, network protections on the management port do not follow current best practices.

An unexpected status return value weakness in the Next-Generation Multicast VPN (NG-mVPN) service of Juniper Networks Junos OS allows attacker to cause a Denial of Service (DoS) condition and core the routing protocol daemon (rpd) process when a specific malformed IPv4 packet is received by the device running BGP. This malformed packet can be crafted and sent to a victim device including when forwarded directly through a device receiving such a malformed packet, but not if the malformed packet is first de-encapsulated from an encapsulated format by a receiving device. Continued receipt of the malformed packet will result in a sustained Denial of Service condition. This issue affects: Juniper Networks Junos OS 15.1 versions prior to 15.1F6-S12, 15.1R7-S2; 15.1X49 versions prior to 15.1X49-D150 on SRX Series; 15.1X53 versions prior to 15.1X53-D68, 15.1X53-D235, 15.1X53-D495, 15.1X53-D590; 16.1 versions prior to 16.1R3-S10, 16.1R4-S12, 16.1R6-S6, 16.1R7-S2; 16.2 versions prior to 16.2R2-S7; 17.1 versions prior to 17.1R2-S9, 17.1R3; 17.2 versions prior to 17.2R1-S7, 17.2R2-S6, 17.2R3; 17.3 versions prior to 17.3R2-S4, 17.3R3.

On versions 14.0.0-14.1.2, 13.0.0-13.1.3, 12.1.0-12.1.5, and 11.5.1-11.6.5, the BIG-IP system fails to perform Martian Address Filtering (As defined in RFC 1812 section 5.3.7) on the control plane (management interface). This may allow attackers on an adjacent system to force BIG-IP into processing packets with spoofed source addresses.

On versions 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.2, 12.1.0-12.1.4.1, and 11.5.2-11.6.4, an attacker sending specifically crafted DHCPv6 requests through a BIG-IP virtual server configured with a DHCPv6 profile may be able to cause the TMM process to produce a core file.

On BIG-IP 14.0.0-14.1.0.5, 13.0.0-13.1.2, 12.1.0-12.1.4.1, 11.5.2-11.6.4, FTP traffic passing through a Virtual Server with both an active FTP profile associated and connection mirroring configured may lead to a TMM crash causing the configured HA action to be taken.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, and 12.1.0-12.1.4, a high volume of malformed analytics report requests leads to instability in restjavad process. This causes issues with both iControl REST and some portions of TMUI. The attack requires an authenticated user with any role.

On BIG-IP 12.1.0-12.1.4.1, undisclosed requests can cause iControl REST processes to crash. The attack can only come from an authenticated user; all roles are capable of performing the attack. Unauthenticated users cannot perform this attack.

On BIG-IP PEM 14.1.0-14.1.0.5 and 14.0.0-14.0.0.4, under certain conditions, the TMM process may terminate and restart while processing BIG-IP PEM traffic with the OpenVPN classifier.

On BIG-IP 14.1.0-14.1.0.5, undisclosed SSL traffic to a virtual server configured with a Client SSL profile may cause TMM to fail and restart. The Client SSL profile must have session tickets enabled and use DHE cipher suites to be affected. This only impacts the data plane, there is no impact to the control plane.

On F5 SSL Orchestrator 14.1.0-14.1.0.5 and 14.0.0-14.0.0.4, undisclosed traffic flow may cause TMM to restart under certain circumstances.

On BIG-IP 11.5.1-11.6.4, iRules performing HTTP header manipulation may cause an interruption to service when processing traffic handled by a Virtual Server with an associated HTTP profile, in specific circumstances, when the requests do not strictly conform to RFCs.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, and 12.1.0-12.1.4, undisclosed traffic sent to BIG-IP iSession virtual server may cause the Traffic Management Microkernel (TMM) to restart, resulting in a Denial-of-Service (DoS).

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, and 12.1.0-12.1.4, an undisclosed traffic pattern sent to a BIG-IP UDP virtual server may lead to a denial-of-service (DoS).

On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, and 12.1.0-12.1.4, the Traffic Management Microkernel (TMM) may restart when a virtual server has an HTTP/2 profile with Application Layer Protocol Negotiation (ALPN) enabled and it processes traffic where the ALPN extension size is zero.

When BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8 are processing certain rare data sequences occurring in PPTP VPN traffic, the BIG-IP system may execute incorrect logic. The TMM may restart and produce a core file as a result of this condition. The BIG-IP system provisioned with the CGNAT module and configured with a virtual server using a PPTP profile is exposed to this vulnerability.

On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, DNS query TCP connections that are aborted before receiving a response from a DNS cache may cause TMM to restart.

On BIG-IP versions 14.0.0-14.0.0.4, 13.0.0-13.1.1.1, 12.1.0-12.1.4, 11.6.0-11.6.3.4, and 11.5.1-11.5.8, the system is vulnerable to a denial of service attack when performing URL classification.

On Junos OS, rpcbind should only be listening to port 111 on the internal routing instance (IRI). External packets destined to port 111 should be dropped. Due to an information leak vulnerability, responses were being generated from the source address of the management interface (e.g. fxp0) thus disclosing internal addressing and existence of the management interface itself. A high rate of crafted packets destined to port 111 may also lead to a partial Denial of Service (DoS). Note: Systems with fxp0 disabled or unconfigured are not vulnerable to this issue. This issue only affects Junos OS releases based on FreeBSD 10 or higher (typically Junos OS 15.1+). Administrators can confirm whether systems are running a version of Junos OS based on FreeBSD 10 or higher by typing: user@junos> show version | match kernel JUNOS OS Kernel 64-bit [20181214.223829_fbsd-builder_stable_10] Affected releases are Juniper Networks Junos OS: 15.1 versions prior to 15.1F6-S12, 15.1R7-S4; 15.1X53 versions prior to 15.1X53-D236; 16.1 versions prior to 16.1R7-S1; 16.2 versions prior to 16.2R2-S9; 17.1 versions prior to 17.1R3; 17.2 versions prior to 17.2R1-S8; 17.3 versions prior to 17.3R2; 17.4 versions prior to 17.4R1-S1, 17.4R1-S7, 17.4R2. This issue does not affect Junos OS releases prior to 15.1.

In BIG-IP 11.5.1-11.5.8, 11.6.1-11.6.3, 12.1.0-12.1.3, and 13.0.0-13.0.1, malformed TCP packets sent to a self IP address or a FastL4 virtual server may cause an interruption of service. The control plane is not exposed to this issue. This issue impacts the data plane virtual servers and self IPs.

On BIG-IP 11.5.1-11.5.8, 11.6.1-11.6.3, 12.1.0-12.1.3.6, 13.0.0-13.1.1.1, and 14.0.0-14.0.0.2, under certain conditions, hardware systems with a High-Speed Bridge and using non-default Layer 2 forwarding configurations may experience a lockup of the High-Speed Bridge.

On BIG-IP 11.5.1-11.5.8, 11.6.1-11.6.3, and 12.0.x, an undisclosed sequence of packets received by an SSL virtual server and processed by an associated Client SSL or Server SSL profile may cause a denial of service.

A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a parsing issue on DNS packets. An attacker could exploit these vulnerabilities by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability is due to a parsing issue on DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the Network-Based Application Recognition (NBAR) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. This vulnerability are due to a parsing issue on DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through routers that are running an affected version and have NBAR enabled. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

In BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.1, 12.1.0-12.1.3.6, 11.6.1-11.6.3.2, or 11.5.1-11.5.8, when processing fragmented ClientHello messages in a DTLS session TMM may corrupt memory eventually leading to a crash. Only systems offering DTLS connections via APM are impacted.

In BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.7, 12.1.0-12.1.3.5, 11.6.1-11.6.3.2, or 11.5.1-11.5.8 or Enterprise Manager 3.1.1, malformed requests to the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, may lead to disruption of TMUI services. This attack requires an authenticated user with any role (other than the No Access role). The No Access user role cannot login and does not have the access level to perform the attack.

The BGP daemon (bgpd) in all IP Infusion ZebOS versions to 7.10.6 and all OcNOS versions to 1.3.3.145 allow remote attackers to cause a denial of service attack via an autonomous system (AS) path containing 8 or more autonomous system number (ASN) elements.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, and 12.1.0-12.1.5.1 and BIG-IQ 5.2.0-7.1.0, when creating a QKView, credentials for binding to LDAP servers used for remote authentication of the BIG-IP administrative interface will not fully obfuscate if they contain whitespace.

In versions 7.1.5-7.1.8, when a user connects to a VPN using BIG-IP Edge Client over an unsecure network, BIG-IP Edge Client responds to authentication requests over HTTP while sending probes for captive portal detection.

In BIG-IQ 5.2.0-7.0.0, high availability (HA) synchronization is not secure by TLS and may allow on-path attackers to read / modify confidential data in transit.

In versions prior to 3.3.0, the NGINX Controller is configured to communicate with its Postgres database server over unencrypted channels, making the communicated data vulnerable to interception via man-in-the-middle (MiTM) attacks.

In versions of NGINX Controller prior to 3.3.0, the helper.sh script, which is used optionally in NGINX Controller to change settings, uses sensitive items as command-line arguments.

The HTTPS protocol, as used in unspecified web applications, can encrypt compressed data without properly obfuscating the length of the unencrypted data, which makes it easier for man-in-the-middle attackers to obtain plaintext secret values by observing length differences during a series of guesses in which a string in an HTTP request URL potentially matches an unknown string in an HTTP response body, aka a "BREACH" attack, a different issue than CVE-2012-4929.

On BIG-IP versions 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5 and BIG-IQ versions 6.0.0-6.1.0 and 5.2.0-5.4.0, a user is able to obtain the secret that was being used to encrypt a BIG-IP UCS backup file while sending SNMP query to the BIG-IP or BIG-IQ system, however the user can not access to the UCS files.

On versions 13.0.0-13.1.0.1, 12.1.0-12.1.4.1, 11.6.1-11.6.4, and 11.5.1-11.5.9, BIG-IP platforms where AVR, ASM, APM, PEM, AFM, and/or AAM is provisioned may leak sensitive data.

F5 BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.6.0-11.6.4, and 11.5.1-11.5.9 and Enterprise Manager 3.1.1 may expose sensitive information and allow the system configuration to be modified when using non-default ConfigSync settings.

F5 BIG-IP ASM 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.6.0-11.6.4, and 11.5.1-11.5.9 may expose sensitive information and allow the system configuration to be modified when using non-default settings.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.1-11.5.8, SNMP exposes sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is inserted into various profile types and accessed using SNMPv2.

On BIG-IP 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, SNMP may expose sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is used with various profile types and is accessed using SNMPv2.

On BIG-IP 14.0.x, 13.x, 12.x, and 11.x, Enterprise Manager 3.1.1, BIG-IQ 6.x, 5.x, and 4.x, and iWorkflow 2.x, the passphrases for SNMPv3 users and trap destinations that are used for authentication and privacy are not handled by the BIG-IP system Secure Vault feature; they are written in the clear to the various configuration files.

A vulnerability in BIG-IP APM portal access 11.5.1-11.5.7, 11.6.0-11.6.3, and 12.1.0-12.1.3 discloses the BIG-IP software version in rewritten pages.

When the F5 BIG-IP APM 13.0.0-13.1.1 or 12.1.0-12.1.3 renders certain pages (pages with a logon agent or a confirm box), the BIG-IP APM may disclose configuration information such as partition and agent names via URI parameters.

A local file vulnerability exists in the F5 BIG-IP Configuration utility on versions 13.0.0, 12.1.0-12.1.2, 11.6.1-11.6.3.1, 11.5.1-11.5.5, or 11.2.1 that exposes files containing F5-provided data only and do not include any configuration data, proxied traffic, or other potentially sensitive customer data.

SSL virtual servers in F5 BIG-IP systems 10.x before 10.2.4 HF9, 11.x before 11.2.1 HF12, 11.3.0 before HF10, 11.4.0 before HF8, 11.4.1 before HF5, 11.5.0 before HF5, and 11.5.1 before HF5, when used with third-party Secure Sockets Layer (SSL) accelerator cards, might allow remote attackers to have unspecified impact via a timing side-channel attack.

In some cases the MCPD binary cache in F5 BIG-IP devices may allow a user with Advanced Shell access, or privileges to generate a qkview, to temporarily obtain normally unrecoverable information.

F5 BIG-IP 12.0.0 and 11.5.0 - 11.6.1 REST requests which timeout during user account authentication may log sensitive attributes such as passwords in plaintext to /var/log/restjavad.0.log. It may allow local users to obtain sensitive information by reading these files.

A BIG-IP virtual server configured with a Client SSL profile that has the non-default Session Tickets option enabled may leak up to 31 bytes of uninitialized memory. A remote attacker may exploit this vulnerability to obtain Secure Sockets Layer (SSL) session IDs from other sessions. It is possible that other data from uninitialized memory may be returned as well.

The server IKEv1 implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.6, IOS XE through 3.18S, IOS XR 4.3.x and 5.0.x through 5.2.x, and PIX before 7.0 allows remote attackers to obtain sensitive information from device memory via a Security Association (SA) negotiation request, aka Bug IDs CSCvb29204 and CSCvb36055 or BENIGNCERTAIN.

The Configuration utility in F5 BIG-IP systems 11.0.x, 11.1.x, 11.2.x before 11.2.1 HF16, 11.3.x, 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4 HF2, 1.6.x before 11.6.1, and 12.0.0 before HF1 allows remote administrators to read Access Policy Manager (APM) access logs via unspecified vectors.

The iControl REST service in F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, Link Controller, and PEM 11.5.x before 11.5.4, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF3; BIG-IP DNS 12.x before 12.0.0 HF3; BIG-IP GTM 11.5.x before 11.5.4 and 11.6.x before 11.6.1; BIG-IQ Cloud and Security 4.0.0 through 4.5.0; BIG-IQ Device 4.2.0 through 4.5.0; BIG-IQ ADC 4.5.0; BIG-IQ Centralized Management 4.6.0; and BIG-IQ Cloud and Orchestration 1.0.0 allows remote authenticated administrators to obtain sensitive information via unspecified vectors.

The Single Sign-On (SSO) feature in F5 BIG-IP APM 11.x before 11.6.0 HF6 and BIG-IP Edge Gateway 11.0.0 through 11.3.0 might allow remote attackers to obtain sensitive SessionId information by leveraging access to the Location HTTP header in a redirect.

F5 BIG-IP LTM, AFM, Analytics, APM, ASM, Link Controller, and PEM 11.3.x, 11.4.x before 11.4.1 build 685-HF10, 11.5.1 before build 10.104.180, 11.5.2 before 11.5.4 build 0.1.256, 11.6.0 before build 6.204.442, and 12.0.0 before build 1.14.628; BIG-IP AAM 11.4.x before 11.4.1 build 685-HF10, 11.5.1 before build 10.104.180, 11.5.2 before 11.5.4 build 0.1.256, 11.6.0 before build 6.204.442, and 12.0.0 before build 1.14.628; BIG-IP DNS 12.0.0 before build 1.14.628; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.3.0; BIG-IP GTM 11.3.x, 11.4.x before 11.4.1 build 685-HF10, 11.5.1 before build 10.104.180, 11.5.2 before 11.5.4 build 0.1.256, and 11.6.0 before build 6.204.442; BIG-IP PSM 11.3.x and 11.4.x before 11.4.1 build 685-HF10; BIG-IQ Cloud, Device, and Security 4.2.0 through 4.5.0; and BIG-IQ ADC 4.5.0 do not properly regenerate certificates and keys when deploying cloud images in Amazon Web Services (AWS), Azure or Verizon cloud services environments, which allows attackers to obtain sensitive information or cause a denial of service (disruption) by leveraging a target instance configuration.

The Edge Client components in F5 BIG-IP APM 10.x, 11.x, 12.x, 13.x, and 14.x, BIG-IP Edge Gateway 10.x and 11.x, and FirePass 7.0.0 allow attackers to obtain sensitive information from process memory via unspecified vectors.

XML External Entity (XXE) vulnerability in sam/admin/vpe2/public/php/server.php in F5 BIG-IP 10.0.0 through 10.2.4 and 11.0.0 through 11.2.1 allows remote authenticated users to read arbitrary files via a crafted XML file.

Certain HP Access Controller, Fabric Module, Firewall, Router, Switch, and UTM Appliance products; certain HP 3Com Access Controller, Router, and Switch products; certain HP H3C Access Controller, Firewall, Router, Switch, and Switch and Route Processing Unit products; and certain Huawei Firewall/Gateway, Router, Switch, and Wireless products do not properly implement access control as defined in h3c-user.mib 2.0 and hh3c-user.mib 2.0, which allows remote authenticated users to discover credentials in UserInfoEntry values via an SNMP request with the read-only community.

On BIG-IP AFM 15.0.0-15.0.1, 14.0.0-14.1.2, 13.1.0-13.1.3.1, and 12.1.0-12.1.5, a vulnerability in the AFM configuration utility may allow any authenticated BIG-IP user to run an SQL injection attack.

A SQL injection vulnerability exists in the BIG-IP AFM management UI on versions 12.0.0, 12.1.0, 12.1.1, 12.1.2 and 13.0.0 that may allow a copy of the firewall rules to be tampered with and impact the Configuration Utility until there is a resync of the rules. Traffic processing and the live firewall rules in use are not affected.

SQL injection vulnerability in the web service in F5 ARX Data Manager 3.0.0 through 3.1.0 allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors.

Multiple SQL injection vulnerabilities in sam/admin/reports/php/saveSettings.php in the (1) APM WebGUI in F5 BIG-IP LTM, GTM, ASM, Link Controller, PSM, APM, Edge Gateway, and Analytics and (2) AVR WebGUI in WebAccelerator and WOM 11.2.x before 11.2.0-HF3 and 11.2.x before 11.2.1-HF3 allow remote authenticated users to execute arbitrary SQL commands via the defaultQuery parameter.

SQL injection vulnerability in my.activation.php3 in F5 FirePass 6.0.0 through 6.1.0 and 7.0.0 allows remote attackers to execute arbitrary SQL commands via the state parameter.

An issue was discovered in HDF5 through 1.12.0. A heap-based buffer over-read exists in the function H5O__layout_decode() located in H5Olayout.c. It allows an attacker to cause Denial of Service.

An issue was discovered in the HDF HDF5 1.10.4 library. There is an out of bounds read in the function H5VM_memcpyvv in H5VM.c when called from H5D__compact_readvv in H5Dcompact.c.

An issue was discovered in the HDF HDF5 1.10.4 library. There is an out of bounds read in the function H5MM_xstrdup in H5MM.c when called from H5O_dtype_decode_helper in H5Odtype.c.

An issue was discovered in the HDF HDF5 1.10.4 library. There is an out of bounds read in the function H5T_close_real in H5T.c.

An issue was discovered in the HDF HDF5 1.10.4 library. There is an out of bounds read in the function H5T_get_size in H5T.c.

A heap-based buffer over-read in H5O_attr_decode() in H5Oattr.c in the HDF HDF5 through 1.10.3 library allows attackers to cause a denial of service via a crafted HDF5 file. This issue was triggered while converting an HDF file to GIF file.

An issue was discovered in the HDF HDF5 1.8.20 library. There is an out of bounds read in H5L_extern_query at H5Lexternal.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a heap-based buffer over-read in the function H5O_sdspace_decode in H5Osdspace.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a heap-based buffer over-read in the function H5T_copy in H5T.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a heap-based buffer over-read in the function H5O_layout_decode in H5Olayout.c, related to HDmemcpy.

An issue was discovered in the HDF HDF5 1.8.20 library. There is an out of bounds read in the function H5O_pline_reset in H5Opline.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a heap-based buffer over-read in the function H5VM_memcpyvv in H5VM.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a stack-based buffer over-read in the function H5F_addr_decode_len in H5Fint.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is an out of bounds read in the function H5F__accum_read in H5Faccum.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a heap-based buffer over-read in the function H5O_fill_old_decode in H5Ofill.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a heap-based buffer over-read in the function H5O_link_decode in H5Olink.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is a buffer over-read in H5O_chunk_deserialize in H5Ocache.c.

An issue was discovered in the HDF HDF5 1.8.20 library. There is an out-of-bounds read in the function H5VM_memcpyvv in H5VM.c.

A out of bounds read was discovered in H5VM_memcpyvv in H5VM.c in the HDF HDF5 1.10.2 library. It could allow a remote denial of service or information disclosure attack.

An out of bounds read was discovered in H5O_fill_new_decode and H5O_fill_old_decode in H5Ofill.c in the HDF HDF5 1.10.2 library. It could allow a remote denial of service or information disclosure attack.

In HDF5 1.10.1, there is an out of bounds read vulnerability in the function H5Opline_pline_decode in H5Opline.c in libhdf5.a. For example, h5dump would crash when someone opens a crafted hdf5 file.

In HDF5 1.10.1, there is an out of bounds read vulnerability in the function H5T_conv_struct_opt in H5Tconv.c in libhdf5.a. For example, h5dump would crash when someone opens a crafted hdf5 file.

On BIG-IP ASM 11.5.1-11.5.8, 11.6.1-11.6.3, 12.1.0-12.1.3, 13.0.0-13.1.1.3, and 14.0.0-14.0.0.2, there is a stored cross-site scripting vulnerability in an ASM violation viewed in the Configuration utility. In the worst case, an attacker can store a CSRF which results in code execution as the admin user.

A cross-site request forgery (CSRF) vulnerability in the APM webtop 11.2.1 or greater may allow attacker to force an APM webtop session to log out and require re-authentication.

Cross-site request forgery (CSRF) vulnerability in cgi-bin/system_setting.exe in Belkin F5D8236-4 v2 allows remote attackers to hijack the authentication of administrators for requests that open the remote management interface on arbitrary ports via the remote_mgmt_enabled and remote_mgmt_port parameters.

A vulnerability in the HTTP/HTTPS service used by J-Web, Web Authentication, Dynamic-VPN (DVPN), Firewall Authentication Pass-Through with Web-Redirect, and Zero Touch Provisioning (ZTP) allows an unauthenticated attacker to perform local file inclusion (LFI) or path traversal. Using this vulnerability, an attacker may be able to inject commands into the httpd.log, read files with 'world' readable permission file or obtain J-Web session tokens. In the case of command injection, as the HTTP service runs as user 'nobody', the impact of this command injection is limited. (CVSS score 5.3, vector CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N) In the case of reading files with 'world' readable permission, in Junos OS 19.3R1 and above, the unauthenticated attacker would be able to read the configuration file. (CVSS score 5.9, vector CVSS:3.1/ AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N) If J-Web is enabled, the attacker could gain the same level of access of anyone actively logged into J-Web. If an administrator is logged in, the attacker could gain administrator access to J-Web. (CVSS score 8.8, vector CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H) This issue only affects Juniper Networks Junos OS devices with HTTP/HTTPS services enabled. Junos OS devices with HTTP/HTTPS services disabled are not affected. If HTTP/HTTPS services are enabled, the following command will show the httpd processes: user@device> show system processes | match http 5260 - S 0:00.13 /usr/sbin/httpd-gk -N 5797 - I 0:00.10 /usr/sbin/httpd --config /jail/var/etc/httpd.conf To summarize: If HTTP/HTTPS services are disabled, there is no impact from this vulnerability. If HTTP/HTTPS services are enabled and J-Web is not in use, this vulnerability has a CVSS score of 5.9 (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N). If J-Web is enabled, this vulnerability has a CVSS score of 8.8 (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:H/I:H/A:H). Juniper SIRT has received a single report of this vulnerability being exploited in the wild. Out of an abundance of caution, we are notifying customers so they can take appropriate actions. Indicators of Compromise: The /var/log/httpd.log may have indicators that commands have injected or files being accessed. The device administrator can look for these indicators by searching for the string patterns "=*;*&" or "*%3b*&" in /var/log/httpd.log, using the following command: user@device> show log httpd.log | match "=*;*&|=*%3b*&" If this command returns any output, it might be an indication of malicious attempts or simply scanning activities. Rotated logs should also be reviewed, using the following command: user@device> show log httpd.log.0.gz | match "=*;*&|=*%3b*&" user@device> show log httpd.log.1.gz | match "=*;*&|=*%3b*&" Note that a skilled attacker would likely remove these entries from the local log file, thus effectively eliminating any reliable signature that the device had been attacked. This issue affects Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S16; 12.3X48 versions prior to 12.3X48-D101, 12.3X48-D105; 14.1X53 versions prior to 14.1X53-D54; 15.1 versions prior to 15.1R7-S7; 15.1X49 versions prior to 15.1X49-D211, 15.1X49-D220; 16.1 versions prior to 16.1R7-S8; 17.2 versions prior to 17.2R3-S4; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S4; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R3-S2 ; 18.4 version 18.4R2 and later versions; 19.1 versions prior to 19.1R1-S5, 19.1R3-S1; 19.1 version 19.1R2 and later versions; 19.2 versions prior to 19.2R2; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2; 20.1 versions prior to 20.1R1-S1, 20.1R2.

Directory traversal vulnerability in the configuration utility in F5 BIG-IP before 12.0.0 and Enterprise Manager 3.0.0 through 3.1.1 allows remote authenticated users to access arbitrary files in the web root via unspecified vectors.

Multiple directory traversal vulnerabilities in F5 BIG-IP before 10.2.2 allow local users with the "Resource Administrator" or "Administrator" role to enumerate and delete arbitrary files via a .. (dot dot) in the name parameter to (1) tmui/Control/jspmap/tmui/system/archive/properties.jsp or (2) tmui/Control/form.

Directory traversal vulnerability in an unspecified signed Java applet in the client-side components in F5 BIG-IP APM 10.1.0 through 10.2.4 and 11.0.0 through 11.3.0, FirePass 6.0.0 through 6.1.0 and 7.0.0, and other products "when APM is provisioned," allows remote attackers to upload and execute arbitrary files via a .. (dot dot) in the filename parameter.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.1-11.5.8, when the BIG-IP system is licensed for Appliance mode, a user with either the Administrator or the Resource Administrator role can bypass Appliance mode restrictions.

On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, administrative users with TMSH access can overwrite critical system files on BIG-IP which can result in bypass of whitelist / blacklist restrictions enforced by appliance mode.

On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, users with the Resource Administrator role can modify sensitive portions of the filesystem if provided Advanced Shell Access, such as editing /etc/passwd. This allows modifications to user objects and is contrary to our definition for the Resource Administrator (RA) role restrictions.

An unauthenticated remote attacker may be able to disrupt services on F5 BIG-IP 11.4.1 - 11.5.4 devices with maliciously crafted network traffic. This vulnerability affects virtual servers associated with TCP profiles when the BIG-IP system's tm.tcpprogressive db variable value is set to non-default setting "enabled". The default value for the tm.tcpprogressive db variable is "negotiate". An attacker may be able to disrupt traffic or cause the BIG-IP system to fail over to another device in the device group.

In F5 BIG-IP systems 12.1.0 - 12.1.2, malicious requests made to virtual servers with an HTTP profile can cause the TMM to restart. The issue is exposed with BIG-IP APM profiles, regardless of settings. The issue is also exposed with the non-default "Normalize URI" configuration options used in iRules and/or BIG-IP LTM policies. An attacker may be able to disrupt traffic or cause the BIG-IP system to fail over to another device in the device group.

F5 BIG-IP LTM systems 11.x before 11.2.1 HF16, 11.3.x, 11.4.x before 11.4.1 HF11, 11.5.0, 11.5.1 before HF11, 11.5.2, 11.5.3, 11.5.4 before HF2, 11.6.0 before HF8, 11.6.1 before HF1, 12.0.0 before HF4, and 12.1.0 before HF2 allow remote attackers to modify or extract system configuration files via vectors involving NAT64.

Virtual servers in F5 BIG-IP systems 11.5.0, 11.5.1 before HF11, 11.5.2, 11.5.3, 11.5.4 before HF2, 11.6.0 before HF8, 11.6.1 before HF1, 12.0.0 before HF4, and 12.1.0 before HF2, when configured with the HTTP Explicit Proxy functionality or SOCKS profile, allow remote attackers to modify the system configuration, read system files, and possibly execute arbitrary code via unspecified vectors.

F5 BIG-IP LTM, Analytics, APM, ASM, and Link Controller 11.2.x before 11.2.1 HF16, 11.3.x, 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1 HF1, and 12.x before 12.0.0 HF3; BIG-IP AAM, AFM, and PEM 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1 HF1, and 12.x before 12.0.0 HF3; BIG-IP DNS 12.x before 12.0.0 HF3; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.2.x before 11.2.1 HF16 and 11.3.0; BIG-IP GTM 11.2.x before 11.2.1 HF16, 11.3.x, 11.4.x, 11.5.x before 11.5.4 HF2, and 11.6.x before 11.6.1 HF1; BIG-IP PSM 11.2.x before 11.2.1 HF16, 11.3.x, and 11.4.0 through 11.4.1; Enterprise Manager 3.1.1; BIG-IQ Cloud and Security 4.0.0 through 4.5.0; BIG-IQ Device 4.2.0 through 4.5.0; BIG-IQ ADC 4.5.0; BIG-IQ Centralized Management 5.0.0; BIG-IQ Cloud and Orchestration 1.0.0; and iWorkflow 2.0.0, when Packet Filtering is enabled on virtual servers and possibly self IP addresses, allow remote attackers to cause a denial of service (Traffic Management Microkernel restart) and possibly have unspecified other impact via crafted network traffic.

Virtual servers in F5 BIG-IP systems 11.2.1 HF11 through HF15, 11.4.1 HF4 through HF10, 11.5.3 through 11.5.4, 11.6.0 HF5 through HF7, and 12.0.0, when configured with a TCP profile, allow remote attackers to cause a denial of service (Traffic Management Microkernel restart) via crafted network traffic.

The default configuration of the IPsec IKE peer listener in F5 BIG-IP LTM, Analytics, APM, ASM, and Link Controller 11.2.1 before HF16, 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF2; BIG-IP AAM, AFM, and PEM 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF2; BIG-IP DNS 12.x before 12.0.0 HF2; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.2.1 before HF16; BIG-IP GTM 11.2.1 before HF16, 11.4.x, 11.5.x before 11.5.4 HF2, and 11.6.x before 11.6.1; and BIG-IP PSM 11.4.0 through 11.4.1 improperly enables the anonymous IPsec IKE peer configuration object, which allows remote attackers to establish an IKE Phase 1 negotiation and possibly conduct brute-force attacks against Phase 2 negotiations via unspecified vectors.

Incomplete blacklist vulnerability in the Configuration utility in F5 BIG-IP LTM, Analytics, APM, ASM, GTM, Link Controller, and PSM 11.x before 11.2.1 HF11, 11.3.x, 11.4.0 before HF8, and 11.4.1 before HF6; BIG-IP AAM 11.4.0 before HF8 and 11.4.1 before HF6; BIG-IP AFM and PEM 11.3.x, 11.4.0 before HF8, and 11.4.1 before HF6; and BIG-IP Edge Gateway, WebAccelerator, and WOM 11.x before 11.2.1 HF11 and 11.3.0 allows remote authenticated users to upload files via uploadImage.php.

In versions 7.1.5-7.1.9, there is use-after-free memory vulnerability in the BIG-IP Edge Client Windows ActiveX component.