In Sprecher Automation SPRECON-E-C/P/T3 CPU in variant PU244x a vulnerable firmware verification has been identified. Through physical access and hardware manipulation, an attacker might be able to bypass hardware-based code verification and thus inject and execute arbitrary code and gain full access of the device.
Improper Input Validation in GitHub repository openemr/openemr prior to 7.0.1.
IBM PowerVM Hypervisor FW860.00 through FW860.B3, FW950.00 through FW950.70, FW1010.00 through FW1010.50, FW1020.00 through FW1020.30, and FW1030.00 through FW1030.10 could allow a local attacker with control a partition that has been assigned SRIOV virtual function (VF) to cause a denial of service to a peer partition or arbitrary data corruption. IBM X-Force ID: 253175.
Dell VxRail versions earlier than 7.0.450, contain(s) an OS command injection vulnerability in VxRail Manager. A local authenticated attacker could potentially exploit this vulnerability, leading to the execution of arbitrary OS commands on the application's underlying OS, with the privileges of the vulnerable application. Exploitation may lead to a system take over by an attacker.
The Hub in the Snap One OvrC cloud platform is a device used to centralize and manage nested devices connected to it. A vulnerability exists in which an attacker could impersonate a hub and send device requests to claim already claimed devices. The OvrC cloud platform receives the requests but does not validate if the found devices are already managed by another user.
An authenticated, remote attacker may use a improper input validation vulnerability in the CmpApp/CmpAppBP/CmpAppForce Components of multiple CODESYS products in multiple versions to read from an invalid address which can lead to a denial-of-service condition.
** UNSUPPORTED WHEN ASSIGNED **
Improper input validation in the Apache Sling Commons JSON bundle allows an attacker to trigger unexpected errors by supplying specially-crafted input.
NOTE: This vulnerability
only affects products that are no longer supported by the maintainer
The org.apache.sling.commons.json bundle has been deprecated as of March
2017 and should not be used anymore. Consumers are encouraged to
consider the Apache Sling Commons Johnzon OSGi bundle provided by the
Apache Sling project, but may of course use other JSON libraries.
In multiple CODESYS products in multiple versions an unauthorized, remote attacker may use a improper input validation vulnerability to read from invalid addresses leading to a denial of service.
Multiple CODESYS products in multiple versions are prone to a improper input validation vulnerability. An authenticated remote attacker may craft specific requests that use the vulnerability leading to a denial-of-service condition.
Improper Input Validation vulnerability in multiple CODESYS V3 products allows an authenticated remote attacker to block consecutive logins of a specific type.
aiven-extras is a PostgreSQL extension. Versions prior to 1.1.9 contain a privilege escalation vulnerability, allowing elevation to superuser inside PostgreSQL databases that use the aiven-extras package. The vulnerability leverages missing schema qualifiers on privileged functions called by the aiven-extras extension. A low privileged user can create objects that collide with existing function names, which will then be executed instead. Exploiting this vulnerability could allow a low privileged user to acquire `superuser` privileges, which would allow full, unrestricted access to all data and database functions. And could lead to arbitrary code execution or data access on the underlying host as the `postgres` user. The issue has been patched as of version 1.1.9.
IBM Security Verify Access 10.0.0, 10.0.1, 10.0.2, 10.0.3, 10.0.4, and 10.0.5 could allow an attacker to crash the webseald process using specially crafted HTTP requests resulting in loss of access to the system. IBM X-Force ID: 247635.
An attacker who has gained access to an admin account can perform RCE via null-byte injection
Vendor: The Apache Software Foundation
Versions Affected: Apache OpenMeetings from 2.0.0 before 7.1.0
Vitess is a database clustering system for horizontal scaling of MySQL through generalized sharding. Prior to version 16.0.2, users can either intentionally or inadvertently create a shard containing `/` characters from VTAdmin such that from that point on, anyone who tries to create a new shard from VTAdmin will receive an error. Attempting to view the keyspace(s) will also no longer work. Creating a shard using `vtctldclient` does not have the same problem because the CLI validates the input correctly. Version 16.0.2, corresponding to version 0.16.2 of the `go` module, contains a patch for this issue. Some workarounds are available. Always use `vtctldclient` to create shards, instead of using VTAdmin; disable creating shards from VTAdmin using RBAC; and/or delete the topology record for the offending shard using the client for your topology server.
The Customer Management Framework (CMF) for Pimcore adds functionality for customer data management. In `pimcore/customer-management-framework-bundle` prior to version 3.3.9, business logic errors are possible in the `Conditions` tab since the counter can be a negative number. This vulnerability is capable of the unlogic in the counter value in the Conditions tab. Users should update to version 3.3.9 to receive a patch or, as a workaround, or apply the patch manually.
Security vulnerability in Apache bRPC <1.5.0 on all platforms allows attackers to execute arbitrary code via ServerOptions::pid_file.
An attacker that can influence the ServerOptions pid_file parameter with which the bRPC server is started can execute arbitrary code with the permissions of the bRPC process.
Solution:
1. upgrade to bRPC >= 1.5.0, download link: https://dist.apache.org/repos/dist/release/brpc/1.5.0/ https://dist.apache.org/repos/dist/release/brpc/1.5.0/
2. If you are using an old version of bRPC and hard to upgrade, you can apply this patch: https://github.com/apache/brpc/pull/2218 https://github.com/apache/brpc/pull/2218
IBM Storage Scale (IBM Spectrum Scale 5.1.0.0 through 5.1.2.9, 5.1.3.0 through 5.1.6.1 and IBM Elastic Storage Systems 6.1.0.0 through 6.1.2.5, 6.1.3.0 through 6.1.6.0) could allow a local user to cause a kernel panic. IBM X-Force ID: 252187.
IBM MQ 9.2 CD, 9.2 LTS, 9.3 CD, and 9.3 LTS could allow an authenticated attacker with authorization to craft messages to cause a denial of service. IBM X-Force ID: 241354.
Apache StreamPark 1.0.0 before 2.0.0 When the user successfully logs in, to modify his profile, the username will be passed to the server-layer as a parameter, but not verified whether the user name is the currently logged user and whether the user is legal, This will allow malicious attackers to send any username to modify and reset the account, Users of the affected versions should upgrade to Apache StreamPark 2.0.0 or later.
IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) is vulnerable to a denial of service as the server may crash when an Out of Memory occurs using the DBMS_OUTPUT module. IBM X-Force ID: 247868.
IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 11.1 and 11.5 is vulnerable to a denial of service as the server may crash when compiling a specially crafted SQL query using a LIMIT clause. IBM X-Force ID: 247864.
IBM Db2 for Linux, UNIX and Windows (includes DB2 Connect Server) 11.5 is vulnerable to a denial of service when attempting to use ACR client affinity for unfenced DRDA federation wrappers. IBM X-Force ID: 249187.
IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.1, 11.1, and 11.5 is vulnerable to a denial of service. Under rare conditions, setting a special register may cause the Db2 server to terminate abnormally. IBM X-Force ID: 247862.
IBM DB2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, and 11.5 is vulnerable to a denial of service as it may trap when compiling a variation of an anonymous block. IBM X-Force ID: 251991.
IBM Db2 for Linux, UNIX and Windows (includes Db2 Connect Server) 10.5, 11.1, and 11.5 is vulnerable to a denial of service as the server may crash when using a specially crafted subquery. IBM X-Force ID: 249196.
Laminas Diactoros provides PSR HTTP Message implementations. In versions 2.18.0 and prior, 2.19.0, 2.20.0, 2.21.0, 2.22.0, 2.23.0, 2.24.0, and 2.25.0, users who create HTTP requests or responses using laminas/laminas-diactoros, when providing a newline at the start or end of a header key or value, can cause an invalid message. This can lead to denial of service vectors or application errors. The problem has been patched in following versions 2.18.1, 2.19.1, 2.20.1, 2.21.1, 2.22.1, 2.23.1, 2.24.1, and 2.25.1. As a workaround, validate HTTP header keys and/or values, and if using user-supplied values, filter them to strip off leading or trailing newline characters before calling `withHeader()`.
In LTOS versions prior to V7.06.013, the configuration file upload function would not correctly validate the input, which would allow an remote authenticated attacker with high privileges to execute arbitrary commands.
A CWE-20: Improper Input Validation vulnerability exists that could allow an authenticated
attacker to gain the same privilege as the application on the server when a malicious payload is
provided over HTTP for the server to execute.
Redis is an open source, in-memory database that persists on disk. Authenticated users can use the `HINCRBYFLOAT` command to create an invalid hash field that will crash Redis on access in affected versions. This issue has been addressed in in versions 7.0.11, 6.2.12, and 6.0.19. Users are advised to upgrade. There are no known workarounds for this issue.
An Improper Input Validation vulnerability in the kernel of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS). If the receipt of router advertisements is enabled on an interface and a specifically malformed RA packet is received, memory corruption will happen which leads to an rpd crash. This issue affects: Juniper Networks Junos OS 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S3; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2; 22.1 versions prior to 22.1R2. Juniper Networks Junos OS Evolved 20.3-EVO version 20.3R1-EVO and later versions; 20.4-EVO versions prior to 20.4R3-S6-EVO; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R2-EVO; 22.1-EVO versions prior to 22.1R2-EVO.
OpenZeppelin Contracts is a library for secure smart contract development. The proposal creation entrypoint (`propose`) in `GovernorCompatibilityBravo` allows the creation of proposals with a `signatures` array shorter than the `calldatas` array. This causes the additional elements of the latter to be ignored, and if the proposal succeeds the corresponding actions would eventually execute without any calldata. The `ProposalCreated` event correctly represents what will eventually execute, but the proposal parameters as queried through `getActions` appear to respect the original intended calldata. This issue has been patched in 4.8.3. As a workaround, ensure that all proposals that pass through governance have equal length `signatures` and `calldatas` parameters.
Snowflake JDBC provides a JDBC type 4 driver that supports core functionality, allowing Java program to connect to Snowflake. Users of the Snowflake JDBC driver were vulnerable to a command injection vulnerability. An attacker could set up a malicious, publicly accessible server which responds to the SSO URL with an attack payload. If the attacker then tricked a user into visiting the maliciously crafted connection URL, the user’s local machine would render the malicious payload, leading to a remote code execution. The vulnerability was patched on March 17, 2023 as part of Snowflake JDBC driver Version 3.13.29. All users should immediately upgrade the Snowflake JDBC driver to the latest version: 3.13.29.
Vitess is a database clustering system for horizontal scaling of MySQL. Users can either intentionally or inadvertently create a keyspace containing `/` characters such that from that point on, anyone who tries to view keyspaces from VTAdmin will receive an error. Trying to list all the keyspaces using `vtctldclient GetKeyspaces` will also return an error. Note that all other keyspaces can still be administered using the CLI (vtctldclient). This issue is fixed in version 16.0.1. As a workaround, delete the offending keyspace using a CLI client (vtctldclient).
Adobe Substance 3D Stager version 2.0.1 (and earlier) is affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
Adobe Acrobat Reader versions 23.001.20093 (and earlier) and 20.005.30441 (and earlier) are affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
Adobe Acrobat Reader versions 23.001.20093 (and earlier) and 20.005.30441 (and earlier) are affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
A vulnerability has been identified in TIA Portal V15 (All versions), TIA Portal V16 (All versions), TIA Portal V17 (All versions), TIA Portal V18 (All versions < V18 Update 1). Affected products contain a path traversal vulnerability that could allow the creation or overwrite of arbitrary files in the engineering system. If the user is tricked to open a malicious PC system configuration file, an attacker could exploit this vulnerability to achieve arbitrary code execution.
Improper Input Validation vulnerability in Apache Software Foundation Apache Airflow Spark Provider.This issue affects Apache Airflow Spark Provider: before 4.0.1.
Improper Input Validation vulnerability in Apache Software Foundation Apache Airflow Drill Provider.This issue affects Apache Airflow Drill Provider: before 2.3.2.
Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the OAuth filter assumes that a `state` query param is present on any response that looks like an OAuth redirect response. Sending it a request with the URI path equivalent to the redirect path, without the `state` parameter, will lead to abnormal termination of Envoy process. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 contain a patch. The issue can also be mitigated by locking down OAuth traffic, disabling the filter, or by filtering traffic before it reaches the OAuth filter (e.g. via a lua script).
Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy does not sanitize or escape request properties when generating request headers. This can lead to characters that are illegal in header values to be sent to the upstream service. In the worst case, it can cause upstream service to interpret the original request as two pipelined requests, possibly bypassing the intent of Envoy’s security policy. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 contain a patch. As a workaround, disable adding request headers based on the downstream request properties, such as downstream certificate properties.
Envoy is an open source edge and service proxy designed for cloud-native applications. Compliant HTTP/1 service should reject malformed request lines. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, There is a possibility that non compliant HTTP/1 service may allow malformed requests, potentially leading to a bypass of security policies. This issue is fixed in versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9.
Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, escalation of privileges is possible when `failure_mode_allow: true` is configured for `ext_authz` filter. For affected components that are used for logging and/or visibility, requests may not be logged by the receiving service. When Envoy was configured to use ext_authz, ext_proc, tap, ratelimit filters, and grpc access log service and an http header with non-UTF-8 data was received, Envoy would generate an invalid protobuf message and send it to the configured service. The receiving service would typically generate an error when decoding the protobuf message. For ext_authz that was configured with ``failure_mode_allow: true``, the request would have been allowed in this case. For the other services, this could have resulted in other unforeseen errors such as a lack of visibility into requests. As of versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, Envoy by default sanitizes the values sent in gRPC service calls to be valid UTF-8, replacing data that is not valid UTF-8 with a `!` character. This behavioral change can be temporarily reverted by setting runtime guard `envoy.reloadable_features.service_sanitize_non_utf8_strings` to false. As a workaround, one may set `failure_mode_allow: false` for `ext_authz`.
Envoy is an open source edge and service proxy designed for cloud-native applications. Prior to versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9, the client may bypass JSON Web Token (JWT) checks and forge fake original paths. The header `x-envoy-original-path` should be an internal header, but Envoy does not remove this header from the request at the beginning of request processing when it is sent from an untrusted client. The faked header would then be used for trace logs and grpc logs, as well as used in the URL used for `jwt_authn` checks if the `jwt_authn` filter is used, and any other upstream use of the x-envoy-original-path header. Attackers may forge a trusted `x-envoy-original-path` header. Versions 1.26.0, 1.25.3, 1.24.4, 1.23.6, and 1.22.9 have patches for this issue.
Improper Input Validation in GitHub repository firefly-iii/firefly-iii prior to 6.0.0.
Improper Input Validation in GitHub repository thorsten/phpmyfaq prior to 3.1.12.
Adobe Dimension versions 3.4.7 (and earlier) is affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
Adobe Dimension versions 3.4.7 (and earlier) is affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
Adobe Dimension versions 3.4.7 (and earlier) is affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.
Adobe Substance 3D Stager versions 2.0.0 (and earlier) are affected by an Improper Input Validation vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.