Threat Intelligence

Incorrect Privilege Assignment vulnerability in Eaton's Intelligent Power Manager (IPM) v1.67 & prior allow non-admin users to upload the system configuration files by sending specially crafted requests. This can result in non-admin users manipulating the system configurations via uploading the configurations with incorrect parameters.

A vulnerability in role-based access control of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow a read-only authenticated, remote attacker to disable user accounts on an affected system. The vulnerability is due to incorrect allocation of the enable/disable action button under the role-based access control code on an affected system. An attacker could exploit this vulnerability by authenticating as a read-only user and then updating the roles of other users to disable them. A successful exploit could allow the attacker to disable users, including administrative users.

Huawei PCManager with versions earlier than 10.0.1.36 has a privilege escalation vulnerability. Due to improper permission management of specific files, local attackers with low permissions can inject commands to exploit this vulnerability. Successful exploit may cause privilege escalation.

Huawei PCManager product with versions earlier than 10.0.5.53 have a local privilege escalation vulnerability. An authenticated, local attacker can perform specific operation to exploit this vulnerability. Successful exploitation may cause the attacker to obtain a higher privilege.

SAP Landscape Management, version 3.0, and SAP Adaptive Extensions, version 1.0, allows an attacker with admin_group privileges to change ownership and permissions (including S-user ID bit s-bit) of arbitrary files remotely. This results in the possibility to execute these files as root user from a non-root context, leading to Privilege Escalation.

On BIG-IP 15.0.0-15.0.1.2, 14.1.0-14.1.2.2, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1 and BIG-IQ 7.0.0, 6.0.0-6.1.0, and 5.2.0-5.4.0, users with non-administrator roles (for example, Guest or Resource Administrator) with tmsh shell access can execute arbitrary commands with elevated privilege via a crafted tmsh command.

IBM Platform LSF 9.1 and 10.1, IBM Spectrum LSF Suite 10.2, and IBM Spectrum Suite for HPA 10.2 could allow a local user to escalate their privileges due to weak file permissions when specific debug settings are enabled in a Linux or Unix enviornment. IBM X-Force ID: 176137.

PCManager with versions earlier than 10.0.5.51 have a privilege escalation vulnerability in Huawei PCManager products. An authenticated, local attacker can perform specific operation to exploit this vulnerability. Successful exploitation may cause the attacker to obtain a higher privilege.

danfruehauf NetworkManager-ssh before 1.2.11 allows privilege escalation because extra options are mishandled.

A vulnerability in the REST API endpoint of Cisco Data Center Network Manager (DCNM) could allow an authenticated, remote attacker to elevate privileges on the application. The vulnerability is due to insufficient access control validation. An attacker could exploit this vulnerability by authenticating with a low-privilege account and sending a crafted request to the API. A successful exploit could allow the attacker to interact with the API with administrative privileges.

IBM Cognos Analytics 11.0 and 11.1 is vulnerable to privlege escalation where the "My schedules and subscriptions" page is visible and accessible to a less privileged user. IBM X-Force ID: 167449.

Zoho ManageEngine Remote Access Plus 10.0.258 does not validate user permissions properly, allowing for privilege escalation and eventually a full application takeover.

log.c in Squid Analysis Report Generator (sarg) through 2.3.11 allows local privilege escalation. By default, it uses a fixed temporary directory /tmp/sarg. As the root user, sarg creates this directory or reuses an existing one in an insecure manner. An attacker can pre-create the directory, and place symlinks in it (after winning a /tmp/sarg/denied.int_unsort race condition). The outcome will be corrupted or newly created files in privileged file system locations.

On BIG-IP versions 15.0.0-15.1.0, 14.0.0-14.1.2.3, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, BIG-IQ versions 7.0.0, 6.0.0-6.1.0, and 5.0.0-5.4.0, iWorkflow version 2.3.0, and Enterprise Manager version 3.1.1, authenticated users granted TMOS Shell (tmsh) privileges are able access objects on the file system which would normally be disallowed by tmsh restrictions. This allows for authenticated, low privileged attackers to access objects on the file system which would not normally be allowed.

On BIG-IP versions 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, users with access to edit iRules are able to create iRules which can lead to an elevation of privilege, configuration modification, and arbitrary system command execution.

Logic issue in subsystem for Intel(R) CSME before versions 12.0.45, 13.0.10 and 14.0.10 may allow a privileged user to potentially enable escalation of privilege and information disclosure via local access.

Logic issue in subsystem in Intel(R) AMT before versions 11.8.70, 11.11.70, 11.22.70 and 12.0.45 may allow an unauthenticated user to potentially enable escalation of privilege via network access.

Symantec Endpoint Protection Manager (SEPM) and Symantec Mail Security for MS Exchange (SMSMSE), prior to versions 14.2 RU2 and 7.5.x respectively, may be susceptible to a privilege escalation vulnerability, which is a type of issue whereby an attacker may attempt to compromise the software application to gain elevated access to resources that are normally protected from an application or user.

After installing the IBM Maximo Health- Safety and Environment Manager 7.6.1, a user is granted additional privileges that they are not normally allowed to access. IBM X-Force ID: 165948.

Sonatype Nexus Repository Manager 2.x before 2.14.15 allows Remote Code Execution.

The administrator of SAP HANA database, before versions 1.0 and 2.0, can misuse HANA to execute commands with operating system "root" privileges.

Symantec Endpoint Protection Manager (SEPM), prior to 14.2 RU1, may be susceptible to a privilege escalation vulnerability, which is a type of issue whereby an attacker may attempt to compromise the software application to gain elevated access to resources that are normally protected from an application or user.

CyberArk Endpoint Privilege Manager 10.2.1.603 and earlier allows an attacker (who is able to edit permissions of a file) to bypass intended access restrictions and execute blocked applications.

An issue was discovered in CapMon Access Manager 5.4.1.1005. CALRunElevated.exe provides "NT AUTHORITY\SYSTEM" access to unprivileged users via the --system option.

The Spotfire Library component of TIBCO Software Inc.'s TIBCO Spotfire Analytics Platform for AWS Marketplace, and TIBCO Spotfire Server contains a vulnerability that might theoretically fail to restrict users with read-only access from modifying files stored in the Spotfire Library, only when the Spotfire Library is configured to use external storage. Affected releases are TIBCO Software Inc.'s TIBCO Spotfire Analytics Platform for AWS Marketplace versions up to and including 10.0.0, and TIBCO Spotfire Server versions up to and including 7.10.1; 7.11.0; 7.11.1; 7.12.0; 7.13.0; 7.14.0; 10.0.0.

Pivotal Operations Manager, versions 2.0.x prior to 2.0.24, versions 2.1.x prior to 2.1.15, versions 2.2.x prior to 2.2.7, and versions 2.3.x prior to 2.3.1, grants all users a scope which allows for privilege escalation. A remote malicious user who has been authenticated may create a new client with administrator privileges for Opsman.

When BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.2.1-11.5.6, BIG-IQ Centralized Management 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, iWorkflow 2.1.0-2.3.0, or Enterprise Manager 3.1.1 is licensed for Appliance Mode, Admin and Resource administrator roles can by-pass BIG-IP Appliance Mode restrictions to overwrite critical system files. Attackers of high privilege level are able to overwrite critical system files which bypasses security controls in place to limit TMSH commands. This is possible with an administrator or resource administrator roles when granted TMSH. Resource administrator roles must have TMSH access in order to perform this attack.

Verba Collaboration Compliance and Quality Management Platform before 9.2.1.5545 has Insecure Permissions.

Emerson AMS Device Manager v12.0 to v13.5. Non-administrative users are able to change executable and library files on the affected products.

IBM Spectrum Protect 7.1 and 8.1 could allow a local user to corrupt or delete highly sensitive information that would cause a denial of service to other users. IBM X-Force ID: 142696.

XS Command-Line Interface (CLI) user sessions with the SAP HANA Extended Application Services (XS), version 1, advanced server may have an unintentional prolonged period of validity. Consequently, a platform user could access controller resources via active CLI session even after corresponding authorizations have been revoked meanwhile by an administrator user. Similarly, an attacker who managed to gain access to the platform user's session might misuse the session token even after the session has been closed.

A vulnerability in the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary code with vmanage user privileges or cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient access restrictions to the HTTP management interface of the affected solution. An attacker could exploit this vulnerability by sending a malicious HTTP request to the affected management service through an authenticated device. A successful exploit could allow the attacker to execute arbitrary code with vmanage user privileges or stop HTTP services on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69976.

An authentication bypass vulnerability in CA Privileged Access Manager 2.8.2 and earlier allows remote attackers to execute arbitrary commands with specially crafted requests.

An authentication bypass vulnerability in CA Privileged Access Manager 2.8.2 and earlier allows remote attackers to execute arbitrary code or commands by poisoning a configuration file.

IBM Netezza Platform Software (IBM PureData System for Analytics 1.0.0) could allow a local user to modify a world writable file, which could be used to execute commands as root. IBM X-Force ID: 140211.

An issue was discovered in EMC RSA Identity Governance and Lifecycle versions 7.0.1, 7.0.2, all patch levels (hardware appliance and software bundle deployments only); RSA Via Lifecycle and Governance version 7.0, all patch levels (hardware appliance and software bundle deployments only); RSA Identity Management & Governance (RSA IMG) versions 6.9.0, 6.9.1, all patch levels (hardware appliance and software bundle deployments only). It allows certain OS level users to execute arbitrary scripts with root level privileges.

Cloudera Manager 5.8.x before 5.8.5, 5.9.x before 5.9.2, and 5.10.x before 5.10.1 allows a read-only Cloudera Manager user to discover the usernames of other users and elevate the privileges of those users.

A local user on F5 BIG-IQ Centralized Management 5.1.0-5.2.0 with the Access Manager role has privileges to change the passwords of other users on the system, including the local admin account password.

Privilege escalation in Replibit Backup Manager earlier than version 2017.08.04 allows attackers to gain root privileges via sudo command execution. The vi program can be accessed through sudo, in order to navigate the filesystem and modify a critical file such as /etc/passwd.

Vulnerability in the Oracle Hospitality Reporting and Analytics component of Oracle Hospitality Applications (subcomponent: Mobile Apps). Supported versions that are affected are 8.5.1 and 9.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hospitality Reporting and Analytics. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Hospitality Reporting and Analytics accessible data as well as unauthorized read access to a subset of Oracle Hospitality Reporting and Analytics accessible data. CVSS 3.0 Base Score 5.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:L/A:N).

Vulnerability in the Primavera P6 Enterprise Project Portfolio Management component of Oracle Primavera Products Suite (subcomponent: Web Access). Supported versions that are affected are 8.3, 8.4, 15.1, 15.2 and 16.1. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Primavera P6 Enterprise Project Portfolio Management. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Primavera P6 Enterprise Project Portfolio Management, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Primavera P6 Enterprise Project Portfolio Management accessible data as well as unauthorized read access to a subset of Primavera P6 Enterprise Project Portfolio Management accessible data. CVSS 3.0 Base Score 5.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N).

Vulnerability in the Oracle Hospitality Reporting and Analytics component of Oracle Hospitality Applications (subcomponent: Reporting). Supported versions that are affected are 8.5.1 and 9.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hospitality Reporting and Analytics. While the vulnerability is in Oracle Hospitality Reporting and Analytics, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Hospitality Reporting and Analytics. CVSS 3.0 Base Score 7.7 (Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:C/C:N/I:N/A:H).

Vulnerability in the Oracle Agile PLM component of Oracle Supply Chain Products Suite (subcomponent: Security). Supported versions that are affected are 9.3.5 and 9.3.6. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Agile PLM. Successful attacks require human interaction from a person other than the attacker and while the vulnerability is in Oracle Agile PLM, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Agile PLM accessible data as well as unauthorized read access to a subset of Oracle Agile PLM accessible data. CVSS 3.0 Base Score 5.4 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N).

Vulnerability in the Java Advanced Management Console component of Oracle Java SE (subcomponent: Server). The supported version that is affected is Java Advanced Management Console: 2.6. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Java Advanced Management Console. While the vulnerability is in Java Advanced Management Console, attacks may significantly impact additional products. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Java Advanced Management Console accessible data as well as unauthorized read access to a subset of Java Advanced Management Console accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Java Advanced Management Console. CVSS 3.0 Base Score 7.4 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:C/C:L/I:L/A:L).

A privilege escalation vulnerability exists when loading DLLs during boot up and reboot in Symantec IT Management Suite 8.0 prior to 8.0 HF4 and Suite 7.6 prior to 7.6 HF7, Symantec Ghost Solution Suite 3.1 prior to 3.1 MP4, Symantec Endpoint Virtualization 7.x prior to 7.6 HF7, and Symantec Encryption Desktop 10.x prior to 10.4.1, which could let a local malicious user execute arbitrary code.

A vulnerability exists in in FortiManager 5.2.1 and earlier and 5.0.10 and earlier in the WebUI FTP backup page

Silicon Integrated Systems XGI WindowsXP Display Manager (aka XGI VGA Driver Manager and VGA Display Manager) 6.14.10.1090 allows local users to gain privileges via a crafted 0x96002404 IOCTL call.

The admin-management-xtended plugin before 2.4.0.1 for WordPress has privilege escalation because wp_ajax functions are mishandled.